Home > News > Technology corridor >

Operation procedures of electric thermostatic incubator

. Use
1. Place the instrument on a platform or workbench in a dry place indoors and in a horizontal state. Install the socket and leakage protection switch in the power line and install the grounding wire.
 
2. Put the items to be cultivated into the Incubator, close the box door, turn on the power, turn on the power switch, and the indicator light is on, indicating that the work is normal and the meter shows the temperature of the studio.
 
3. The switching regulator control instruments knob to the desired temperature, heating was started the working chamber, the green light on the control instrument indicates that the electricity is heating up, the red light that off heat, alternating lights that enter a constant temperature, after about 30 minutes into a constant temperature, the set temperature is basically the same as the actual temperature.
 
4. If you need to change the set temperature, you can adjust the knob at any time. After the work is completed, turn off the power switch.
 
, Maintenance
1. The instrument should be placed in a room with good ventilation conditions, indoor relative humidity is not more than 85%, do not place flammable, explosive and corrosive materials around.
 
2. There is no riot protection device in this instrument. Inflammable and explosive materials cannot be placed in the working room.
 
3. The inside and outside of the incubator should be kept clean, the dustproof cover should not be covered for a long time, and placed in the dry room.
 
4. During use, ventilation holes should be properly opened to let off the humid air. Abnormal temperature changes should be promptly shut down to check slag.
 
5. When the items are placed, the power should be cut off to ensure the safety of operation.
 
6. It is forbidden to place the item on the cover plate of the furnace to avoid burning or damaging the equipment.

  • Pre-sale
  • 0086-020-36246586
  • 0086-020-36247961
  • 0086-020-36246649
  • 0086-020-36246650
  • 0086-020-36246651
  • After-sales
  • 0086-18688422996