Home > News > Technology corridor >

Electric Thermostatic incubator use and maintenance method

. Use
1. Place the instrument on a platform or workbench in a dry place indoors and in a horizontal state. Press the socket and the leakage protection switch in the power line and install the grounding wire.   
2. Put the items to be cultivated into the Incubator, close the box door, turn on the power, turn on the power switch, and the indicator light is on, indicating that the work is normal and the meter shows the temperature of the studio.
3. Control the instrument knob switch to adjust to the desired temperature, the work chamber to start heating, green light on the control instrument indicates that the power up temperature, red light means that power insulation, alternating red and green lights that enter the constant temperature state, into the thermostat after about 30 minutes, the set temperature is basically the same as the actual temperature.
4. If you need to change the set temperature, you can adjust the knob at any time. After the work is completed, turn off the power switch.
1. The instrument should be placed in a room with good ventilation conditions, indoor relative humidity is not greater than 85%, do not place around its flammable: exposure and corrosive materials.
2. There is no riot protection device in this instrument. Inflammable and explosive materials cannot be placed in the working room.
3. Inside and outside the box should be kept clean, do not cover the dust cover for a long time, placed in a dry room.
4. During use, ventilation holes should be properly opened to let off the humid gas. Abnormal temperature changes should be promptly shut down to check slag.
5. When the items are placed, the power should be cut off to ensure the safety of operation.
6. It is forbidden to place the item on the cover plate of the furnace to avoid burning or damaging the equipment.

Share to
  • Pre-sale
  • 0086-020-36246586
  • 0086-020-36247961
  • 0086-020-36246649
  • After-sales
  • 0086-18688422996
  • Complaint
  • service@kentonchina.com