Home > News > Technology corridor >

How to use dry heat disinfection chamber?

Now the world has undergone tremendous changes in the epidemic situation, and all countries take this battle seriously.  According to the research of "Diagnosis and Treatment Plan for Pneumonia Infected in novel coronavirus", various disinfection chamberes have been developed on the market to deal with it.

Kenton Instrument Co., Ltd. has developed a new type of dry heat disinfection chamber, which has won the favor of customers once it goes on the market.  So, how to use this dry heat disinfection chamber?  Since there are three models of this disinfection chamber, let's take XD-45AS as an example.

Steps:

1. The controller is powered on. The "index number and version number" are arranged in the upper row of the display screen, and the "maximum temperature setting value" is displayed in the lower row. After about 3 seconds, the controller enters the normal display state.

2. Refer to and set the temperature and constant temperature time

1) if there is no constant temperature timing function:

Click the "Set" key to enter the temperature setting state. The prompt "SP" is displayed in the upper row of the display screen and the temperature setting value is displayed in the lower row (the first bit value flashes). The required setting value can be modified by shifting, increasing and decreasing keys.  Click the "Set" key again to exit this set state and the modified set value will be automatically saved.

2) if there is a constant temperature timing function

Click the "Set" key to enter the temperature setting state. The prompt "SP" is displayed in the upper row of the display screen and the temperature setting value is displayed in the lower row (the first bit value flashes). The modification method is the same as above.  Then click the "Set" key to enter the constant temperature time setting state. The prompt "ST" is displayed in the upper row of the display screen and the constant temperature time setting value is displayed in the lower row (the first bit value flashes);  Click the "Set" key again to exit this set state and the modified set value will be automatically saved.

When the constant temperature time is set to "0", it means that there is no timing function, the controller runs continuously, and the lower row of the display screen displays the temperature set value;  When the set time is not "0", the lower row of the display screen displays the running time or temperature set value (see VII. Running time display mode (value of parameter ndt) in the internal parameter table -2). When the running time is displayed, the "running time" character lights up. After the measured temperature reaches the set temperature, the timer starts timing, the "running time" character flashes, when the timing time is up, the lower row of the display screen displays "End", and the buzzer beeps for 1 minute before stopping beeping.  After the operation is finished, press the "decrease" key for 3 seconds to restart the operation.

Note: If the temperature setting value is increased during the timing, the meter will start timing again from 0. If the temperature setting value is decreased, the meter will continue to keep timing.

3. Abnormal alarm of sensor

If "--"is displayed in the upper row of the display screen, it means that the temperature sensor fails or the temperature exceeds the measurement range or the controller itself fails. The controller automatically turns off the heating output, the buzzer continuously beeps, and the alarm indicator is always on. Please carefully check the temperature sensor and its wiring.

4. When the upper deviation overtemperature alarm is given, the buzzer will beep and the alarm indicator will always be on.  When a deviation alarm occurs, the buzzer will beep and beep, and the alarm indicator will flash. If an overtemperature alarm occurs due to changing the temperature setting value, the alarm indicator will illuminate, but the buzzer will not beep.

5. Press any key to mute the buzzer.

6. If no key is pressed within 1 minute under the set state, the controller will automatically return to the normal display state.

Kenton Instrument has a good reputation in the market and a professional sales and technical service team. With many years of operating experience, it is familiar with and understands the market situation and has won the favor of domestic and foreign manufacturers.  Now we have mass-produced disinfection chamber, welcome to consult!

Share to
  • Pre-sale
  • 0086-020-36246586
  • 0086-020-36247961
  • 0086-020-36246649
  • After-sales
  • 0086-18688422996
  • Complaint
  • service@kentonchina.com