Home > News > Technology corridor >

The difference between KH series and DHG series of constant temperature drying oven

Although the appearance of Kenton laboratory constant temperature drying oven KH and DHG are very similar, there are actually many differences. The following is a detailed introduction.

Constant temperature electric heating drying oven DHG series is suitable for users who have high requirements on temperature uniformity, and is the basic supporting equipment of laboratory research units, and is recommended for modern middle and senior laboratories.
\
1. Inner liner material
Adopt stainless steel mirror surface
2. Circulating fan
High temperature resistant bearing with cooling fan
3. Electric heating tube
201 stainless steel
4. Intelligent system
Computer microcomputer interface
Remote network monitoring
5. Heating surface: in addition to 9230 outside the single surface
6. Circulating air duct: three sides + front air
7. Door sealing material: silicone
8. Insulation layer: insulation cotton
9. Temperature control accuracy ℃: 0.1/with C-0.5
10. Fluctuation: ± 1%
11. Timing function, over-temperature alarm

Constant temperature electric heating drying oven KH series of conventional experiments and tests recommended to use, cost-effective. More expensive samples are recommended to be installed with independent temperature limit controller.
\
1. Inner chamber material
KH galvanized or stainless steel
2. Circulation fan
KH with cooling fan
3. Electric heating tube
Carbon steel pipe
4. Heating surface: single side
5. Circulating air duct: three sides
6. Door sealing material: silicone
7. Insulation layer: insulation cotton
8. Temperature range ℃: room temperature +5-250
9. Temperature control accuracy ℃ ±0.5
10. Fluctuation: ±1%
11. Timing function, over-temperature alarm

Share to
  • Pre-sale
  • 0086-020-36246586
  • 0086-020-36247961
  • 0086-020-36246649
  • After-sales
  • 0086-18688422996
  • Complaint
  • service@kentonchina.com