Home > News > Technology corridor >

How to use a proportional carbon dioxide chamber

Proportional CO2 control chambers are commonly used to control the concentration of carbon dioxide in the studio by setting the ratio of the input gas. The parameters are set as follows:
1) Temperature setting
After 3 seconds of power-on display "888...", enter the normal operation state, press the main heating temperature setting key "Tset", the controller enters the temperature setting state, the lower row of the controller temperature window displays the temperature setting The lower row of the controller temperature window displays the oven temperature setting symbol "SP", the upper row displays the oven temperature setting value, the user can modify the reference according to the need.
2)CO2 concentration setting
Press the CO2 concentration key "Cset", the controller enters the CO2 concentration setting state, the lower row of the CO2 concentration window displays the CO2 concentration setting prompt "SP", the upper row displays the CO2 concentration setting value, the user can modify the parameter according to the need. Press the key again to exit the temperature setting state.
(3) Relative humidity: <85%RH; water level control: when there is a low water level alarm, the heating output is automatically switched off.
4) Door control: automatic shut-off of fan, heating and CO2 inflation output when the door switch is opened.
5)Fault handling: When the sensor breaks or short-circuit or the temperature exceeds the upper limit of measurement, the upper row of the temperature window will display "□□□□", automatically shut off the heating output, the buzzer will sound, you can click the "silence" key to silence the sound, please check the sensor and its wiring carefully. Please check the sensor and its wiring carefully.
\

 

Share to
  • Pre-sale
  • 0086-020-36246586
  • 0086-020-36247961
  • 0086-020-36246649
  • After-sales
  • 0086-18688422996
  • Complaint
  • service@kentonchina.com