Home > News > Industry news >

Thermostatic incubator operation method

The thermostatic incubator is a high-precision constant temperature device with heating control. It can be widely used in biochemistry, chemical pharmaceuticals, medical units, industrial and mining enterprises, colleges and universities, scientific research and other fields. It can be used as seeds, cells, and bacteria culture.

Thermostatic incubator operation method:
1. When the controller is powered on, all displays light up, and it enters the normal display state after about 2 seconds.
2. Setting of temperature, constant temperature time and fan speed Click the "set" button to enter the temperature setting state, the upper row of the display window flashes, and you can use the shift, increase, and decrease keys to modify the desired set value; then click the "set" button to enter the constant temperature Time setting status, the two characters on the left side of the lower row of the display window flash, and you can press the shift, increase, and decrease keysModify to the required hour setting value; then click the "set" button, the two characters on the right side of the lower row of the display window will flash, and you can use the shift, increase, and decrease buttons to modify to the required minute set value; click again "Set" button, the fan speed bar flashes, you can use the increase and decrease buttons to modify to the desired set value (If there is no fan output, skip this step); click the "set" button again to exit this setting state, and the set value will be automatically saved. When the set time is set to "0", it means that there is no timing function, the controller runs continuously, and the lower row of the display window displays the temperature set value; when the set time is not "0", wait until the measured temperature reaches the set temperature , The lower row of the display window displays the constant temperature time, and the second symbol flashes, when the time is up, the operation ends, all outputs are turned off, the lower row of the display window displays "End", and the buzzer beeps 3 times. After running, long press the "reduce/rerun" button for 3 seconds to restart the running.
 
thermostatic incubator

3. When over-temperature alarms, the "ALM" alarm lamp lights up, and the buzzer keeps beeping. Click any key to mute the sound.
4. In the setting state, if no key is pressed within 60 seconds, the controller will automatically return to the normal display state.
5. If the upper row of the controller display window shows "----", it means that the temperature sensor or the controller itself is faulty. Please check the temperature sensor and its wiring carefully.
 
The thermostatic incubator is generally the main equipment for cultivating microorganisms and can be used for the cultivation and reproduction of bacteria and cells. The principle is to use artificial methods to create an artificial environment for the growth and reproduction of microorganisms, cells, and bacteria in the incubator, such as controlling a certain temperature, humidity, and gas.

In the previous:Industrial oven microcomputer control The next article:Ergonomic structure design of constant temperature incubator
  • Pre-sale
  • 0086-020-36246586
  • 0086-020-36246650
  • 0086-020-36246649
  • After-sales
  • 0086-18688422996
  • Complaint
  • service@kentonchina.com