Home > News > Industry news >

How to maintain and repair industrial oven daily?

In the process of using the industrial oven, a series of failures may occur. Even if you encounter these, there is no need to worry, as long as the daily maintenance is good, the failures can be reduced.

How should industrial oven be maintained?
1. The industrial oven should be kept clean frequently, and should not be wiped with corrosive chemical solutions to avoid chemical reactions.
2. If the industrial oven is not to be used for a long time, neutral grease or petroleum jelly should be applied to the electroplated parts to prevent corrosion, and a plastic film dust cover should be placed in the room of the air box to prevent the electrical appliances from being affected by moisture.

So when there is a malfunction, how should it be repaired?
1. When there is no response after plugging in the power and turning on the power switch, you should check the power supply problem, and you can ask an electrician to help solve it; if the heating tube is burned out, you can use a multimeter to measure the resistance value at both ends of the heating tube in the "ohm" gear. A value of 0 indicates that the heating wire is short-circuited, which is represented as a total trip of the switch; if the resistance value is several hundred kiloohms or infinite, it indicates that the heating wire is blown or open.
2. The temperature of the industrial oven cannot rise, please check whether the timing time has run to the timing setting value, and check whether the fan is running. If the check is broken, use a multimeter to measure whether there is 380V voltage at the two ends of the fan pin, and then notify the company Mail accessories to solve.
3. If there is heating as a result of the motor not running, but the air volume of the inner tank cannot circulate, causing the temperature to rise slowly, notify the company to replace it.

If there are more problems with industrial oven failures, please consult our company. After-sales service is available 24 hours a day, so you will have no worries about after-sales. Thank you new and old users for their support to Kangheng. 

In the previous:industrial oven KH series and accessories The next article:What is a humidity chamber?
  • Pre-sale
  • 0086-020-36246586
  • 0086-020-36246650
  • 0086-020-36246649
  • After-sales
  • 0086-18688422996
  • Complaint
  • service@kentonchina.com